The programmable clock makes this option obsolete and so it’s use isn’t recommended. If you use the ” overlay ” option, then there are actually two framebuffers in the video memory. Return to General Old Hardware. Horizontal waving or jittering of the whole screen, continuously independent from drawing operations. This can be fixed by using the ” 18BitBus ” option. The xx chipsets can use MMIO for all communications with the video processor.

Uploader: Meztijin
Date Added: 4 June 2006
File Size: 56.28 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 49480
Price: Free* [*Free Regsitration Required]

An 8bpp one and a 16bpp one.

Information for Chips and Technologies Users

This might be pertinent to the issues I’m having? The flat panel timings are related to the panel size and not texh size of the mode specified in xorg.

This option might be used if the default video overlay key causes problems.

Like the overlays, the Xvideo extension uses a part of the video memory for a second framebuffer. This option forces the two display channels to be used, giving independent refresh rates. Using the PCI driver from that bundle causes scrambled chip output.

Would anyone happen to twch any advice or leads on the matter? It is possible to turn the linear addressing off with this option.

Worst case scenario, i wonder if i could load in a low profile graphics card that’s less trouble and get it to play ball with the internal LCD.

The default behaviour is to have both the flat panel and the CRT use the same display channel and thus the same refresh rate. This option forces the server to assume that there are 8 significant bits. Alternatively the user can use the ” TextClockFreq ” option described above to select a different clock for the text console. Using this option the user can override the maximum dot-clock and specify any value they prefer.


So with the ” Overlay ” option, using the ” SetMClk ” option to reduce the speed of the memory clock is recommended.

Chips and Technologies (Asiliant) Free Driver Download for Windows XP () – WXPvzip

Many laptops used the chipset, so I would go driver hunting on OEM sites. Also, a photo of the machine itself for anyone who’s curious! This has a different effect depending on the hardware on which it is used. This is a problem with the video BIOS not knowing about all the funny modes that might be selected. So the value actually used for the memory clock might be significantly less than this maximum value. If the colours seem darker than they should be, perhaps your ramdac is has 8 significant bits.

Information for Chips and Technologies Users

Did this card even have an ISA flavor? The reason for this is that the manufacturer has used the panel timings to get a standard EGA mode to work on flat panel, and these same timings don’t work for an SVGA mode. If you see such display wnd, and you have this warning, your choices are to reduce the refresh rate, colour depth or resolution, or increase the speed of the memory clock with the the ” SetMClk ” option described above.


Hence the server assumes a This shouldn’t affect higher depths, and is fixable with a switch to the virtual console and back. It often uses external DAC’s and programmable clock chips to supply additional functionally.

With this option all of the graphics are rendered into a copy of the framebuffer that is keep in the main memory of the computer, and the screen is updated from this copy. It’s entirely possible the video RAM is bad.

However if you do try this option and are willing to debug it, I’d like to hear from you. This serial link allows an LCD screens to be located up to m from the video processor.

Most of the Chips and Technologies chipsets are supported by this driver to some degree. Hence you will see a line like.

Chips and Technologies Video Drivers Download

The driver is capable of driving both a CRT and a flat panel display. In this case the driver divides the video processors dotclock limitation by the number of bytes per pixel, so that the limitations for the various colour depths are. A general problem with the server that can manifested in many way such as drawing errors, wavy screens, etc is related to the programmable clock.